Specifications

Pinging Another Device
RoamAbout Mobility System Software Configuration Guide 5-27
Pinging Another Device
ToverifythatanotherdeviceinthenetworkcanreceiveIPpacketssentbytheRoamAboutSwitch,
usethefollowingcommand:
ping host [count num-packets] [dnf] [flood] [interval time] [size size] [source-
ip ip-addr | vlan-name]
Example
TopingadevicethathasIP address10.1.1.1,typethefollowingcommand:
RBT-8100# ping 10.1.1.1
PING 10.1.1.1 (10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.
64 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=0.769 ms
64 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.628 ms
64 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=0.676 ms
64 bytes from 10.1.1.1: icmp_seq=4 ttl=255 time=0.619 ms
64 bytes from 10.1.1.1: icmp_seq=5 ttl=255 time=0.608 ms
--- 10.1.1.1 ping statistics ---
5 packets transmitted, 5 packets received, 0 errors, 0% packet loss
Inthisexample,thepingissuccessful,indicatingthattheRoamAboutSwitchhasIPconnectivity
withtheotherdevice.
(Forinformationaboutthecommandoptions,seetheRoamAboutMobilitySystemSoftware
CommandLineInterfaceReference.)
Note: The RoamAbout Switch cannot ping itself. MSS does not support this.