Specifications

Configuring and Managing Time Parameters
5-22 Configuring and Managing IP Interfaces and Services
Displaying the Summertime Period
Todisplaythesummertimeperiod,usethefollowingcommand:
show summertime
Example
Todisplaythesummertimeperiod,typethefollowingcommand:
RBT-8100# show summertime
Summertime is enabled, and set to 'PDT'.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
and ending at 2:00 am on last Sunday of October.
Forinformationaboutthefieldsintheoutput,seetheRoamAboutMobilitySystemSoftware
CommandLineInterfaceReference.
Clearing the Summertime Period
Toclearthesummertimeperiod,usethefollowingcommand:
clear summertime
Statically Configuring the System Time and Date
Tostaticallyconfigurethesystemtimeanddate,usethefollowingcommand:
set timedate {date mmm dd yyyy [time hh:mm:ss]}
Thedayofweekisautomaticallycalculatedfromthedayyouset.
Example
TosetthedatetoFebruary29,2004andtimeto23:58:
RBT-8100# set timedate date feb 29 2004 time 23:58:00
Time now is: Sun Feb 29 2004, 23:58:02 PST
TheCLImakesthetimechange,thendisplaysthecurrentsystemtimebasedonthechange.(The
timedisplayedmightbeslightlylaterthanthetimeyouenterduetotheintervalbetweenwhen
youpressEnterandwhentheCLIreadsanddisplaysthenewtimeanddate.)
Displaying the Time and Date
Todisplaythetimeanddate,usethefollowingcommand:
show timedate