Specifications

Managing the Management Services
RoamAbout Mobility System Software Configuration Guide 5-15
Managing HTTPS
Enabling HTTPS
HTTPSisdisabledbydefault.ToenableHTTPS,usethefollowingcommand:
set ip https server {enable | disable}
Displaying HTTPS Information
TodisplayHTTPSserviceinformation,usethefollowingcommand:
show ip https
Example
TodisplayinformationforaRoamAboutSwit ch’sHTTPSserver,typethefollowingcommand:
RBT-8100> show ip https
HTTPS is enabled
HTTPS is set to use port 443
Last 10 Connections:
IP Address Last Connected Time Ago (s)
------------ ----------------------- ------------
10.10.10.56 2003/05/09 15:51:26 pst 349
ThecommandliststheTCPportnumberonwhichtheswitchlistensforHTTPSconnections.The
commandalsoliststhelast10devicestoestablishHTTPSconnectionswiththe switchandwhen
theconnectionswereestablished.
IfabrowserconnectstoaRoamAboutSwitchfrombehindaproxy,thenonlythe
proxyIPaddress
isshown.Ifmultiplebrowsersconnectusingthesameproxy,theproxyaddressappearsonlyonce
intheoutput.
Caution: If you disable the HTTPS server, WebView access to the switch is also disabled.