Specifications

Managing the Management Services
5-14 Configuring and Managing IP Interfaces and Services
Managing Telnet Server Sessions
UsethefollowingcommandstomanageTelnetserversessions:
show sessions admin
clear sessions admin telnet [session-id]
ThesecommandsdisplayandclearmanagementsessionsfromaremoteclienttotheRoamAbout
Switch’s Telnetserver.
Examples
TodisplaytheTelnetserversessionsonaRoamAboutSwitch,typethefollowingcommand:
RBT-8100# show sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
3 admin sessions
ToclearallTelnetserversessions,typethefollowingcommand:
RBT-8100# clear sessions telnet
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared telnet session on tty2
(TomanageTelnetclientsessions,see“LoggingIntoaRemoteDevice”onpage 5‐28.)
Note: If you type the clear sessions admin telnet command from within a Telnet session, the
session ends as soon as you press Enter.