Specifications

Managing the Management Services
RoamAbout Mobility System Software Configuration Guide 5-13
Adding a Telnet User
TologinwithTelnet,ausermustsupplyavalidusernameandpassword.Toaddausernam eand
passwordtothelocaldatabase,usethefollowingcommand:
set user username password password
Optionally,youalsocanconfigureMSSeithertolocallyauthenticatetheuserortouseaRADIUS
servertoauthenticatetheuser.Usethefollowingcommand:
set authentication admin {user-glob} method1 [method2] [method3] [method4]
YoucanusethesameusernameandpasswordforSSHorcreateanewone.ForaCLIexample,see
“AddinganSSHUser”onpage 5‐11.
Displaying Telnet Status
TodisplaythestatusoftheTelnetserver,usethefollowingcommand:
show ip telnet
Example
TodisplaytheTelnetserverstatusandtheTCPportnumberonwhichaRoamAboutSwitch
listensforTelnettraffic,typethefollowingcommand:
RBT-8100> show ip telnet
Server Status Port
----------------------------------
Enabled 23
Changing the Telnet Service Port Number
TochangetheTCPporttheRoamA bou tSwitchlistensonforTelnetconnections,usethe following
command:
set ip telnet port-num
Resetting the Telnet Service Port Number to Its Default
ToresettheTelnetmanagementservicetoitsdefaultTCPport,usethefollowingcommand:
clear ip telnet
Caution: If you change the Telnet port number from a Telnet session, MSS immediately ends the
session. To open a new management session, you must Telnet to the switch with the new Telnet
port number.