Specifications

Managing the Management Services
5-12 Configuring and Managing IP Interfaces and Services
Managing SSH Server Sessions
UsethefollowingcommandstomanageSSHserversessions:
show sessions admin
clear sessions admin ssh [session-id]
ThesecommandsdisplayandclearSSHserversessions.
Examples
TodisplaytheSSHserversessionsonaRoamAboutSwitch, typethefollowingcommand:
RBT-8100# show sessions admin
Tty Username Time (s) Type
------- -------------------- -------- ----
tty0 3644 Console
tty2 tech 6 Telnet
tty3 sshadmin 381 SSH
3 admin sessions
ToclearallSSHserversessions,typethe followingcommand:
RBT-8100# clear sessions admin ssh
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared ssh session on tty3
TomanageTelnetclientsessions,see“LoggingIntoaRemoteDevice”onpage 5‐28.
Managing Telnet
Telnetrequiresavalidusernameandpasswordforaccesstotheswitch.
Telnet Login Timers
Aftertheusernamepromptisdisplayed,MSSallows30secondstoenteravalidusernameand
passwordtocompletethelogin.IfyoudonotpressEnterorcompletetheloginbeforethetimer
expires,MSSendsthesession.Thistimerisnotconfigurable.
Enabling Telnet
Telnetisdisabledbydefault.ToenableTelnet,usethefollowingcommand:
set ip telnet server {enable | disable}
Note: If you type the clear sessions admin ssh command from within an SSH session, the session
ends as soon as you press Enter.