Installation guide

Mounting in a Four-Post System
RBT-8100 Wireless Switch Installation Guide 2-5
6. Attachthechassisbrackets,asshowninFigure 2‐6,tothefrontposts(A)usingtwoscrews(B)
andonenutbar(C)perside.
Figure 2-6 Attaching a Front Bracket to a Front Post
7. Ifyourchassiscamewithhandlesattached(whichwereremovedinstep 1),installthechassis
handlesasshowninFigure 2‐7.
a. Slideahandle(A)
betweenthechassisandthechassisbracket.
b. Aligntheholeinthehandlewiththeunusedholeinthechassisbracket.
c. Installaspacer(B)betweenthehandleandthechassisbracket.
d. Installandtightenscrew(C)tosecurethehandle.
e. Repeatstepathroughstepctoattachthehandle
totheoppositeside.
A
C
B
A. Front post
B . Screw
C. Spacer