Installation guide

A-5
Hardware Reset to Factory Defaults
7. Reapply power then press the reset button (S1) on the AP. If an image is not available,
the AP waits approximately three minutes then resets to factory default values.
NetRider Loader indicates a loading status.
8. Click on Close to exit NetRider Loader when the loading is complete.
9. View the console screen. You will see activity on the console screen as the unit resets.
When the reset is complete, the Login screen displays again.
CAUTION: The NetRider Loader application only indicates when the file
copy is completed, it does not indicate when the upgrade is complete.