Installation guide

Reviewing the Site Requirements
1-2 Preparing for Installation
Reviewing the Site Requirements
Please review the site requirements before you install the Access Point.
Hardware Requirements
Table 1-1: AP Physical Specifications (with plastic cover)
Environmental Requirements
Ensure that the environmental requirements are within the ranges described in Table 1-2.
Table 1-2: Environmental Specifications
1
For sites above 4900 m (16,000 ft.), decrease the operating temperature specification by 1.8°C for
each 1000 m or 3.2
°F for each 3200 ft.
Parameter Access Point
Width 17.9 cm (7.06 in)
Height 16.8 cm (6.64 in)
Depth 4.1 cm (1.63 in)
Weight .86 kg (1.9 lb)
Parameter Description
Operating Environment
Temperature
1
5°C to 50°C (41°F to 122°F)
Relative humidity 15% to 90% (non-condensing)
Altitude above sea level 2.4 km (8000 ft.)
Air flow Convection cooled
Nonoperating Environment
Temperature -40°C to 66°C (-40°F to 151°F)
Relative humidity 15 to 90% (non-condensing)
Altitude Up to 4.9 km (16,000 ft)