User`s guide

Configure Voice over Wireless IP Service
3-44 Configuring Wireless Services
16. ClickNext.SelectRadioProfileVoicintheRadioProfileslist.
17. ClickFinish.
Create a Service Profile for Vocera VoWIP Devices
1. SelectConfigurationonthetoolbar.
2. IntheOrganizerpanel,expandtheRoamAboutSwitch.
3. ExpandWireless,thenselectWirelessServices.
4. IntheTaskListpanel,selectVoiceServiceProfile.
TheVoiceServiceProfilewizardisdisplayed.
5. ClickNext.
6. ChangetheserviceprofilenametoVoice‐Vocera,andusethenameVoceraBadges
fortheSSID.
7. SelectVoceraintheVendordrop‐downlist.
8. ClickNext.LeaveMACAccessselected.
9. ClickNext.LeaveStaticWEPselected.
10. SpecifytheWEPkeys.
•Foreachkey(uptofour),typethekeyvalueinthecorrespondingkeybox.
•Bydefault,datainunicastandmulticastpacketsareencrypted
usingWEPkey 1.Touse
anotherkeyforeithertypeofpacket,selectthekeynumberintheWEPUnicastKeyIndex
orWEPMulticastKeyIndexbox.
11. ClickNext.TypeorselectthenameoftheVLANyouwanttoplaceSVPusersin.Forthis
example,usevoice
‐vlan.
12. ClickCreatetoaddMACuserstotheswitch’slocaldatabase.
a. IntheUserMACAddressbox,typetheMACaddressfortheuserdevice,usingcolons(:)
asdelimiters.Youmustspecifyall6bytesoftheMACaddress.
b. IntheMACUserGrouplist,selecttheMACuser
groupthattheuserdevicebelongsto,if
thegroupisalreadyconfigured.
c. IntheVLANNamebox,selectortypethenameoftheVLANthattheuserdevicebelongs
to(1 to 16alphanumericcharacters,withnospacesortabs).TheRoamAboutSwitchwill
authorizetheuserforthatVLAN.
d. Click
Next.Intheattributerowyouwanttoconfigure,clicktheAttributeValuecolumn.
(Refertothe“AuthorizationAttributes”sectioninthe“ConfiguringAuthentication,
Authorization,andAccountingParameters”chapteroftheRoamAboutSwitchManager
InterfaceReferenceGuide.)
e. ClickFinish.
13. ClickNext.SelectRadioProfileVoicintheRadioProfileslist.
14. ClickFinish
.
Note: Typing the VLAN name here does not actually configure the VLAN. To configure a VLAN,
refer to “Set Up VLANs on RoamAbout Switches” on page 3-15.