User`s guide

Configure Voice over Wireless IP Service
3-42 Configuring Wireless Services
Create a Service Profile for Avaya VoWIP Devices
1. SelectConfigurationonthetoolbar.
2. IntheOrganizerpanel,expandtheRoamAboutSwitch.
3. ExpandWireless,thenselectWirelessServices.
4. IntheTaskListpanel,selectVoiceServiceProfile.
TheVoiceServiceProfilewizardisdisplayed.
5. ClickNext.
6. ChangetheserviceprofilenametoVoice‐Avaya,andusethenameAvaya
fortheSSID.
7. SelectAvayaintheVe ndordrop‐downlist.
8. ClickNext.SelectOpenAccessanddeselectMACAccess.
9. ClickNext.SelectWPAanddeselectStaticWEP.
10. ClickNext.LeaveTKIPenabled,andclickNext.
11. ClickNext.Typeapassphrasefrom8to63characterslonginthe
Pre‐sharedKeybox,and
clickGenerate.
12. ClickNext.Type,orselect,thenameoftheVLANyouwanttoplaceAvayausersin.Forthis
example,usevoice‐vlan.
13. ClickNext.
Notes: Typing the VLAN name here does not actually configure the VLAN. To configure a
VLAN, refer to “Set Up VLANs on RoamAbout Switches” on page 3-15.