User`s guide

Configure Voice over Wireless IP Service
3-40 Configuring Wireless Services
13. ClickNext.SelectEnableWMM.
14. ClickNext.SelectaMACAddressuserfromthelist,orclickCreatetocreateone.Ifyou
choosenottouseaMACAddress,clickNext.
15. ClickNext.SelectRadioProfileVoicintheRadioProfileslist.
16. ClickFinish.
Create a Service Profile for SVP VoWIP Devices
1. SelectConfigurationonthetoolbar.
2. IntheOrganizerpanel,expandtheRoamAboutSwitch.
3. ExpandWireless,thenselectWirelessServices.
4. IntheTaskListpanel,selectVoiceServiceProfile.
TheVoiceServiceProfilewizardisdisplayed.
5. ClickNext.
6. ChangetheserviceprofilenametoVoice‐SVP,andusethenameSVP
fortheSSID.
7. LeaveSpectraLinkselectedintheVendordrop‐downlist.
8. ClickNext.SelectOpenAccessanddeselectMACAccess.
9. ClickNext.SelectWPAanddeselectStaticWEP.
10. ClickNext.LeaveTKIPenabled,andclickNext.
11. ClickNext.Typeapassphrasefrom8to63characterslongin
thePre‐sharedKeybox,and
clickGenerate.