User`s guide

Configure Voice over Wireless IP Service
RoamAbout Switch Manager User’s Guide 3-35
Step Summary
Thefollowinglistsummarizesthefieldsselectedorconfigurationitemsenteredintheexample
thatfollowstoconfigureVoWIPaccess:
1. Createaradioprofile.
a. FromtheRadioProfilewizard,enterRadioProfileVoiceastheNameoftheradioprofile.
b. ClickFinish.
c. SelecttheradioprofileandclickProperties.
d. Selectthe802.11Attributesand
changetheDTIMPeriodto3.
e. ClickOK.
2. CreateaVoiceServiceProfile.
a. FromtheVoiceServiceProfilewizard,clickNext,andenterVoice‐WMM,Voice‐SVP,Voice‐
Avaya,orVoi ce‐VoceraastheNameoftheserviceprofileandWMM,SVP,Avaya,orVocera
astheSSID.Select
theVendor(SpectraLink,Avaya,orOther).
b. SelecttheVendor(SpectraLink,Avaya,Vocera,orOther).
c. ClickNext.Selecttheaccesstype.(TheexamplesinthissectionuseOpenAccess.)
d. ClickNext.Selectthedataencryptionmethod.(TheexamplesinthissectionuseWPAand
disableStaticWEP.)
e. ClickNext.Leave
TKIPenabledandclickNext.
f. ClickNext.Typeapassphrasefrom8to63characterslonginthePre‐sharedKeyboxand
clickGenerate.
g. ClickNext .Typevoice‐vlanastheVLANnametoplacevoiceusersin.
h. ClickNext .(IfthedevicesupportsWMM,selectWMM.)
i. Click
Next.SelectRadioProfileVoicintheRadioProfileslist.
j. ClickFinish.
3. SetupaVLANontheRoamAboutSwitches.
a. FromtheCreateVLANwizard,entervoice‐vlanastheVLANname.
b. ClickNext.SelecttheVLANports.ClickMovetousethemexclusivelyinthisVLAN.
c. ClickFinish.
d. SelecttheVLAN
andclickProperties.
e. SelectIGMPanddeselectEnabledtodisableIGMPsnooping.