User`s guide

Configure Voice over Wireless IP Service
3-34 Configuring Wireless Services
“Create a
Service Profile
for Voice” on
page 3-36
1. Toolbar option: select
Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand Wireless.
4. Click Wireless Services.
5. Select Voice Service Profile
in the Task List.
From the Create Service Profile wizard:
• Service profile name: edit name
• SSID name: enter name
• SSID Type: use Clear (unencrypted)
• VLAN Name: enter name
• Authentication server: select LOCAL
• Radio profile: select one
“Set Up a VLAN
for VoWIP on
RoamAbout
Switches” on
page 3-45
1. Toolbar option: select
Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand System.
4. Click VLANs.
5. Select VLAN in the Task List.
From the Create VLAN wizard:
• VLAN Name: enter name
• VLAN ID: select number
• IP Address: enter IP Address
• Ports: select ports and move them to the voice
VLAN
For SpectraLink, from the VLAN Properties dialog:
• IGMP: disable
Note: SVP requires IGMP snooping to be disabled.
Table 3-4 Creating a Service for VoWIP Access (continued)
Task Path Primary Parameters to Configure