User`s guide

Configure Voice over Wireless IP Service
RoamAbout Switch Manager User’s Guide 3-33
Configure Voice over Wireless IP Service
VoiceoverWirelessIP(VoWIP)isanewtechnology,mergingVoIP(VoiceoverIP)with802.11
wirelessLANstocreateawirelesstelephonesystem.OrganizationsthataddVoWI Ptotheir
wirelessLANscandeployandmanagevoiceanddataoverasinglewirelessbackbone,reserving
someportionofnetworkbandwidthto
supportreal‐timevoicecommunications.
ForaVoWIPservice(sometimesalsoreferredtosimplyasVoIP,orVoiceoverIP),youcanconfigure
eitherlocalorRADIUSserverauthentication,andaddAccessLists(ACLs)torestrictuseraccess.
ThissectioncontainsthefollowinginformationabouthowtoconfigureVoWIPservices:
•“TaskTable”onpage 3‐33
•“StepSummary”onpage 3‐35
•“CreateaServiceProfileforWMMVoWIPDevices”onpage 3‐37
•“CreateaServiceProfileforSVPVoWIPDevices”onpage 3‐40
•“CreateaServiceProfileforAvayaVoWIPDevices”onpage 3‐42
Table 3‐4containsthetasks
youmustperformtoconfigureGuestaccessservices.Thetable
containsreferencestothesection“Example:ConfigureEmployeeAccess”onpage 3‐5.The
referencesareprovidedincaseyouwanttoreferbacktodetailedsteps.However,besuretouse
theconfigurableoptionsforVoWIPaccessservicessetforth
inthe“StepSummary”onpage 3‐35.
The“StepSummary”providestheconfigurableoptionsyoushouldset.
Task Table
Table 3‐4containsthetasksyouneedtoperformtocreateVoWIPaccessservices .Forasummary
ofconfigurableitems,referto“StepSummary”onpage 3‐35.
Table 3-4 Creating a Service for VoWIP Access
Task Path Primary Parameters to Configure
“Create a Radio
Profile” on
page 3-5
1. Toolbar option: select
Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand Wireless.
4. Click Radio Profiles.
5. Select Radio Profile in the
Task List.
From the Create Radio Profile wizard:
• Radio profile name: enter a name
For SpectraLink, from the Radio Profile Properties
dialog:
• 802.11 attributes: change DTIM to 3
After you create the service profile, you can map it to
the radio profile.
After you install the APs, you can map their radios to
the radio profile.
Note: The examples in this section configure the radio
profile first. However, you also can configure the radio
profile later as part of service profile configuration.