User`s guide

Configure Guest Access Services
3-20 Configuring Wireless Services
3. CreateaWeb‐Portalserviceprofile.
a. FromtheWeb‐PortalServiceProfilewizard,clickNextandenterWeb‐Portal‐Guestsasthe
NameoftheserviceprofileandGuestsastheSSID.
b. ClickNext.Enterguest_vlan.
c. ClickNext.ClickNextagain.SelectLOCALandclickAdd.
d. ClickNext.ClickNext
again.SelectRadioProfile1andclickAdd.Selectdefaultandclick
Remove.
e. ClickFinish.
4. SetupaVLANontheRoamAboutSwitches.
a. FromtheCreateVLANwizard,enterguest‐vlanastheVLANname.
b. ClickNext.SelecttheVLANports.ClickAddtosharethemwithotherVLANsorMove
to
usethemexclusivelyinthisVLAN.IfyouclickMove,thenselectTag.
c. ClickFinish.
5. Optional:ConfigureaMobilityProfile.
a. FromtheCreateMobilityProfilewizard,entertheProfileName.
b. Choose“Selected”.
c. ChoosethePortsorDistributedAPstowhichyou’llrestrictguestuserstocertain
geographicareasofyour
network.
d. ClickFinish.
Fordetailedinformationaboutthesteps,refertothe“TaskTable”onpage 3‐2.Newconfiguration
itemsthatwerenotpart oftheexample“ConfigureEmployeeAccessServices”onpage 3‐2are
includedinthefollowingsections.
Create a User Group and Guest Users
Onewaytoadministerguestuseraccountsistoconfigureaguestusergroupandadduserstothe
group.
Create Users
Tocreateusers:
1. SelectConfigurationonthetoolbar.
2. IntheOrganizerpanel,expandtheRoamAboutSwitch.
3. ExpandAAA,thenselectLocalUserDatabase.
4. IntheTaskListpanel,selectUser.