User`s guide

Configure Guest Access Services
3-18 Configuring Wireless Services
Configure Guest Access Services
Guestaccessisaccessforvisitorsatyourlocation,andistypicallyclear(noencryption).
ThissectioncontainsthefollowinginformationabouthowtoconfigureGuestaccessservices:
•“TaskTable”onpage 3‐18
•“StepSummary”onpage 3‐19
•“Optional:ConfigureMobilityProfiles”onpage 3‐31
Table 3‐3onpage 3‐18
containsthetaskstoconfigureGuestaccessservices.The“StepSummary”
providestheconfigurableoptionstoset.Thetablecontainsreferencestothe“Example:Configure
EmployeeAccess”onpage 3‐5.Thereferencesareprov idedincaseyouwanttoreferbackto
detailedsteps.However, besuretousethe
configurableoptionsforGuestaccessservicessetforth
inthe“StepSummary”onpage 3‐19.Optionally,youcanconfiguremobilityprofilesforyour
Guestaccessservicestolimitaccessbasedoncriteria,suchasRFcoverageareaortimeofday.
Task Table
Table 3‐3containsthetasksyouneedtoperformtocreateGuestaccessservices.Forasummaryof
configurableitems,referto“StepSummary”onpage 3‐19.
Table 3-3 Creating a Service for Guest Access
Task Path Primary Parameters to Configure
“Create a Radio
Profile” on
page 3-5
1. Toolbar option: select
Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand Wireless.
4. Click Radio Profiles.
5. Select Radio Profile in the Task
List.
From the Create Radio Profile wizard:
• Radio profile name: enter a name
After you create the service profile, you can map it
to the radio profile.
After you install the APs, you can map their radios
to the radio profile.
Note: The examples in this section configure the
radio profile first. However, you also can configure
the radio profile later as part of service profile
configuration.
“Create a User
Group and
Guest Users”
on page 3-20
1. Toolbar option: select
Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand AAA.
4. Click Local User Database.
5. Select User in the Task List.
From the Create Named User wizard:
• Username: enter name
• Password: enter password
• Authorization attributes: configure the end-date,
to specify when the account expires