User`s guide

Configure Employee Access Services
3-16 Configuring Wireless Services
5. Entervlan‐mktastheVLANnameandusetheVLANIDsuggestedbythewizard.
6. ClickNext.SelecttheportsyouwanttouseintheVLANandclickAddorMove.
•TheAddbuttonaddstheportstothenewVLANwithoutremovingthemfromanyother
VLANs.
•TheMovebuttonremovestheportsfromallotherVLANs,andplacestheminthenew
VLAN.
TheportsappearintheCurrentMemberslist.
Totag portsintheVLAN,selectTagandeditthetagvalue.(Taggingisrequiredifyouclick
Add,becausetheportsarethenmembers
ofmultipleVLANs.)
7. ClickNext.(Optional)ToassignanIPinterfacetotheVLAN,edittheIPaddressorselect
DHCPClient.ToenabletheIPinterface,selectInterfaceEnabled.
8. ClickFinish.
ThenewVLANappearsintheContentpanel.