User`s guide

Configure Employee Access Services
RoamAbout Switch Manager User’s Guide 3-7
Configure RADIUS Servers
RemoteAuthenticationDial‐InUserService(RADIUS)isa client‐serversecurityprotocolthat
providesauthentication,authorization,andaccountingfornetworkusersand devices.ARADIUS
serverstoresuserprofiles,whichincludeusernames,passwords,andotheruserattributes.
PerformthefollowingtoconfigureRADIUSservers:
• ConfigureRADIUSserverattributesinRASM
• Configure
attributesontheRADIUSserver
Configure the RADIUS Server in RASM
ToconfigureRADIUSinRASM,youdefineRADIUSservergroups(namedsetsofRADIUS
servers).Youmustcreate atleastoneservergroup.RADIUSservergroupscanauthenticate
administratorsandnetworkusers.
ToconfiguretheRADIUSserverinRASM:
1. SelectConfigurationonthetoolbar.
2. IntheOrganizerpanel,expandtheRoamAboutSwitch
onwhichyouareconfiguringthe
service.
3. ExpandAAA,thenselectRADIUS.
4. IntheTaskListpanel,selectRADIUSServer.
TheCreateRADIUSServerwizardisdisplayed.
5. Typethename,IPaddress,andkey,thenclickNext.
RASMsuggeststhenameofaservergroupinwhichtoplacetheserver.
Theservergroupis
requiredbecauseAAArulesrefertoservergroups,nottoindividualservers.