User`s guide

Configure Employee Access Services
RoamAbout Switch Manager User’s Guide 3-3
“Configure
RADIUS
Servers” on
page 3-7
1. Toolbar option: select Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand AAA.
4. Click RADIUS.
5. Select RADIUS Server in the Task
List.
From the Create RADIUS Server wizard:
• Name: enter server name
• IP Address: enter server IP address
• Key: enter key
• Server group: allow the wizard to create it
• On the RADIUS servers themselves,
configure the AAA backed (not in RASM):
• Set up each RoamAbout Switch as a
RADIUS client.
• Define the Enterasys vendor-specific
attributes (VSAs) in the RADIUS server’s
dictionary.
• Configure each user record with
authorization rules (username and
password).
• Configure each user with either the Vlan-
Name attribute (Enterasys VSA) or the
RADIUS Tunnel-Private-Group-ID to assign
users to VLANs.
• Configure authentication rules (802.1X,
MAC, Open Access, or Web Portal).
“Create a
Service Profile
for 802.1X
Access” on
page 3-10
1. Toolbar option: select Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand Wireless.
4. Click Wireless Services.
5. Select 802.1X Service Profile in the
Task List.
From the Create Service Profile wizard:
• Service profile name: edit name
• SSID name: enter name
• Security mode: select WPA (and deselect
Dynamic WEP)
• Encryption type: use TKIP (already selected)
• EAP Type: use External RADIUS Server
(already selected)
• RADIUS server group: select one
• SSID default VLAN: enter name
• Radio profile: select one
“Set Up a
VLAN for
VoWIP on
RoamAbout
Switches” on
page 3-45
1. Toolbar option: select Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand System.
4. Click VLANs.
5. Select VLAN in the Task List.
From the Create VLAN wizard:
• VLAN Name: enter name
• VLAN ID: select number
• IP Address: enter IP Address
• Ports: select ports, and either move them
(use them only in the new VLAN) or add
them (share them with other VLANs)
• If you add them, select Tag
Table 3-1 Creating a Service for Employee Access (continued)
Task Path Primary Parameters to Configure