User`s guide

Configure Employee Access Services
3-2 Configuring Wireless Services
Configure Employee Access Services
ServicesforEmployeeaccessaretypicallyconfiguredtoprovidesecure,encryptedaccesstothe
wirelessnetwork.
ThefollowingsectionsprovideinformationabouthowtoconfigureEmployeeaccess:
•“TaskTable”onpage 3‐2
•“StepSummary”onpage 3‐4
•“Example:ConfigureEmployeeAccess”onpage 3‐5
Table 3‐1containsthetasksyou
needtoperformtocreateaserviceforemployeeaccess.Fora
summaryofconfigurableitems,referto“StepSummary”onpage 3‐4.Fordetailedstepsabout
howtoperformeachofthesetasks,referto“Example:ConfigureEmployeeAccess”onpage 3‐5.
Task Table
Table 3‐1containsthetasksyouneedtoperformtocreateaserviceforemployeeaccess.Fora
summaryofconfigurableitems,referto“StepSummary”onpage 3‐4.Fordetailedstepsabout
howtoperformeachofthesetasks,referto“Example:ConfigureEmployeeAccess”onpage 3‐5.

Table 3-1 Creating a Service for Employee Access
Task Path Primary Parameters to Configure
“Create a
Radio Profile”
on page 3-5
1. Toolbar option: select Configuration.
2. Organizer panel: expand the
RoamAbout Switch.
3. Expand Wireless.
4. Click on Radio Profiles.
5. Select Radio Profile in the task list.
From the Create Radio Profile wizard:
• Radio profile name: enter a name
After you create the service profile, you can
map it to the radio profile.
After you install the RoamAbout APs, you can
map their radios to the radio profile.
Note: The examples in this section configure
the radio profile first. However, you also can
configure the radio profile later as part of
service profile configuration.