User`s guide

Management and Monitoring
2-16 Planning and Managing Your Wireless Network
Client Monitoring Reports
Client Session Summary Displays summary data for sessions in the selected scope.
Client Session Details Displays detailed session information.
Client Errors Provides data on client-related health in the network over time;
for example, if there is a large number of association failures in
some area of the network.
RF Reports
Wireless Network Usage Provides information about network resource usage and client
activity.
RF Summary Provides information about overall network health using
selected radio statistics. It can be used to compare RF
environments across the network and isolate potential problem
areas.
Radio Details Provides a detailed set of statistical information for each radio
in the selected AP.
Traffic Reports
Traffic Provides details about the throughput rate and types of packets
passing through the network.
Rogue Reports
Rogue Details Provides current and historical information for a selected rogue.
Rogue Summary Provides information for all visible rogues for a selected time.
RF Planning Reports
Site Survey Order Provides a map of your site that can be used to guide a site
survey.
Work Order Provides information installers use to physically install
RoamAbout Switches and APs.
Alarm Reports
Alarm Summary Provides the total number of current faults in the system and
identifies them by type, source, severity or state.
Alarm History Provides a list of all faults in the system that were active within
a specified time period. Users can sort the faults by source,
severity, or category.
Security Provides a report of Denial of Service (DoS) and Intrusion
Detection System (IDS) alarms.
Client OUI Provides a list of alarms according to the Organizationally
Unique Identifier (OUI) of the client for which the alarms were
generated.
Table 2-2 RASM Reports (continued)
Report Description