User`s guide

Configuring the RBT-4102
B-4 Access Point RBT-4102 Conversion
5. IntheFirmwareUpgradeareaonthepage,clicktheBrowsebuttonnexttotheLocal,New
firmwarefilefieldandbrowsetothelocationoftheRBT‐4102‐thin‐bin.imgwhichyou
downloadedpreviously.
6. SelecttheRBT‐4102‐thin‐bin.imgfileandclickOpen.
7. ClicktheStartUpgradebutton.After
asuccessfulcompletionoftheupgrade,ascreenis
displayedthatpromptsyoutoresettheaccesspoint.
8. ClickOK.
9. WhentheAdministrationpageisdisplayedagain,clicktheResetbuttonnexttotheReset
AccessPointfield.