User`s guide

Configuring the RBT-4102
RoamAbout Switch Manager User’s Guide B-3
2. Entertheusernameandpassword,andclickLOGIN.
Ifyoudidnotchangethedefaultsettings,enterthedefaultusernameofadminandthe
defaultpasswordofpassword,andclickLOGIN.
TheCountryCodepage,ifapplicable,appears.
3. TosettheCountry,ifapplicable,performthefollowingsteps:
a. Clickthearrow
intheCountrypull‐downmenutoselecttheappropriatecountry,then
clickApplyatthebottomofthepage.Theaccesspointpromptsyoutoreset.
b. ClickOK.TheIdentificationpageappears.
4. ClickAdministrationfromthemenuontheleft‐handsideofthepage.TheAdministration
pageappears.
Note: Resetting the access point will take you back to the Login page.