User`s guide

Configuring the AP3000
A-4 Access Point 3000 Conversion
b. ClickOK.TheIdentificationpageappears.
4. ClickAdministrationfromthemenuontheleft‐handsideofthepage.TheAdministration
pageappears.
5. IntheFirmwareUpgradeareaonthepage,clicktheBrowsebuttonnexttotheLocal,New
firmwarefilefieldandbrowsetothelocationoftheRBT3K‐
thin‐bin.imgwhichyou
downloadedpreviously.
6. SelecttheRBT3K‐thin‐bin.imgfileandclickOpen.
7. ClicktheStartUpgradebutton.Afterasuccessfulcompletionoftheupgrade,ascreenis
displayedthatpromptsyoutoresettheaccesspoint.