User`s guide

Optimizing the RF Coverage Model
9-6 Optimizing a Network Plan
AfteryouimportyourRFmeasurements,youcorrecttheattenuationfactorsforthefloor.
Referto“OptimizingtheRFCoverageModel”onpage 9‐6nextforinformationaboutthis
topic.
Optimizing the RF Coverage Model
AnattenuationlibraryisasetofattenuationvaluesfortheRFobstaclesonafloor.Afteryou
importRFmeasurementsfromasitesurveyorapplythemfromtheRFmeasurementsinyour
networktoyournetworkplan,yourebuildafloor’sattenuationlibraryusingthoseRF
measurements.
Tooptimize
theRFcoveragemodel:
1. DisplaythefloorplanintheContentpanel.
2. IntheTaskListpanel,clickRFPlanning.
3. UnderSiteSurveyintheTaskListpanel,clickOptimi ze.
Awizardappears,listingtheprogressoftherequest.