User`s guide

Using RF Measurements from an Ekahau Site Survey
9-4 Optimizing a Network Plan
Importing RF Measurements from the Ekahau Site Survey
Afteryoucompletethesitesurvey,youimportthecsvfilecontainingtheRFmeasurementsfrom
theEkahauSiteSurveytoolintoyournetworkplan.AfteryouimportyourRFmeasurements,you
optimizetocorrectattenuationforobstaclesonthefloor.
ToimportRFmeasurements:
1. Displaythefloorplaninthe
Contentpanel.
2. IntheTaskListpanel,clickRFPlanning.
3. UnderSiteSurvey,clickImportMe asurement.TheImportRFMeasurementswizardis
displayed.
4. SelectFileasthesourceofthemeasurements.
5. SelectEkahaufromtheFileFormatlistbox.
6. ClickChoosetonavigatetothecsvfilethatcontainstheRFmeasurementdata.
7. IntheMapNamefield,verifythemapname.
ThemapnameintheRFNeighborhoodSourcewindowmustmatchthemapnameinthetop
lineofthe.csvfilefromtheEkahauSiteSurveytool.