User`s guide

Plan RF Coverage
RoamAbout Switch Manager User’s Guide 6-21
25. TocalculateAPplacementandconfigurationbasedonbothcoverageandoncapacityfor
voiceoverIP,enablePlanforVoiceoverIP.Otherwise,clickNextandgotostep 30.
Bydefault,RASMperformsonlythecoveragecalculation.IfyouenablethePlanforVoice
overIPoption,RASMperforms
bothcalculations.
26. IntheActiveCallBandwidthlist,specifytheamountofbandwidthinkilob ytespersecond
(Kbps)thatyouex pectforeachcall.
27. IntheActiveHandsetsperAPlist,specifythenumberofvoiceoverIPphonesthatyouwant
eachAPtohandle.
28. IntheExpectedHandsetCountlist,
specifythenumberofvoiceoverIPphonesyouexpectto
beinthecoveragearea.
29. IntheHandsetOversubscriptionRatiolist,selecttheratiofortheaveragetransmitbehaviorof
thevoiceoverIPphones.
Thehandsetoversubscriptionratioistheratioofactivehandsetscomparedtototalhandsets.
Forexample,
theratio4:1indicatesthat,statistically,25percentofthevoiceoverIPphonesare
activeatanygiventime.
30. ClickNext.TheMobilityDomain,RadioProfile,WiringCloset(s)pageappears.