User`s guide

Plan RF Coverage
6-20 Using RF Planning
20. TocalculateAPplacementandconfigurationbasedonbothcoverageandoncapacity,enable
UseCapacityCalculationforData.Otherwise,clickNextandgotostep 24.
Bydefault,RASMperformsonlythecoveragecalculation.IfyouenabletheUseCapacity
CalculationforDataoption,RASMperformsbothcalculations.
21. InthePer
StationThroughputlist,specifythethroughput(combinedtransmitandreceive)in
kilobitspersecond(Kbps)for astation.
22. IntheExpectedStationCountlist,specifythenumberofclientsyouexpecttobeinthe
coveragearea.
23. IntheStationOversubscriptionRatiolist,selecttheratioforthe averagetransmitbehavior
of
thestations.
Thestationoversubscriptionratioistheratioofactiveclientscomparedtototalclients.For
example,theratio5:1indicatesthat,statistically,20percentoftheclientsareactiveatany
giventime.
24. ClickNext.TheCapacityPlanningforVoicepageappears.