User`s guide

Plan RF Coverage
6-18 Using RF Planning
12. TochangethedefaultRoamAboutSwitchmodel,selectthemodelfromtheRoamAbout
SwitchModellist:
13. TochangethedefaultAPmodel,selectthemodelfromtheDefaultAPModellist.
14. TochangetheAPconnectiontype,selectthetypefromtheAPConnectionTypelist:
• Distributed—APscanbeindirectlyattached
throughintermediateLayer 2orLayer 3
devices.
• Distributed(Auto)—APscanbeindirectlyattachedthroughintermediateLayer 2or
Layer 3devices.Theyreceivetheirconfigurationautomaticallyusingaprofilethatassigns
aDistributedAPnumberandnametotheAPfromamongtheunusedvalidAPnumbers
availableontheswitch.
15. ClickNext.
IfyouselectedDistributedintheAPConnectionTypelist,theRedundant
Connectionspageappears;gotostep 16 .IfyouselectedDistributed(Auto)intheAP
ConnectionTypelist,theCapacityPlanningforDatapageappears;gotostep 20.