User`s guide

Plan RF Coverage
RoamAbout Switch Manager User’s Guide 6-17
7. For802.11g,topreventtheassociationof802.11bclientstoanyradiointhiscoveragearea,
selectExclude802.11bclients.Toallow802.11bclientstoassociatetoradiosinthecoverage
area,clearExclude802.11bclients.
8. ClickNext.TheFloorPropertiespageappears.
9. Tochangetheceilingheight,specifythe
newheightintheHeightoftheCeilingbox.
10. TochangetheheightwhereAPsaremounted,specifythenewmountingheightintheAP
PlacementHeightbox.
11. ClickNext.TheDefaultDeviceSettingspageappears.
Note: Even when association of 802.11b clients is disabled, if an 802.11b/g radio detects a
beacon from an 802.11b network, the radio enters protection mode to protect against
interference.