User`s guide

Define Site Information
RoamAbout Switch Manager User’s Guide 6-5
Add Site Information
Toaddsiteinformation
1. SelecttheRFPlanningtoolbaroption.
2. IntheOrganizerpanel,clickthenameofthenetworkplan.
3. SelectCreateSiteintheTaskListpanel.TheCreateSitewizard,aseriesofdialogboxes,
promptsyouforinformationaboutthenewsite.
4. IntheSiteNamebox,type
anameforthesite(1 to 80alphanumericcharacters,withnospaces
ortabs),andclickNext.
5. TochangetheCountryCode,selectthecountrywherethenetworkistobedeployedinthe
CountryCodelist.
6. IntheChannelSet(802.11b/g)list,selectthesetofoperatingchannelsforany802.11b/g
AP
radiosyouplantouse(ifdifferentfromthedefault),andclickNext.
7. IntheNumberOfBuildingsbox,specifyhowmanybuildingsareinyoursite,andclick
Finish.
Whenyouspecifythenumberofbuildingsasitecontains,RASMcreateseachbuildingusing
thedefaultsettings.Youcan
editthebuildingsRASMcreatesoryoucanaddnewbuildings.