User`s guide

Create Your RF Coverage Area
RoamAbout Switch Manager User’s Guide 5-9
12. TochangethedefaultRoamAboutSwitchmodel,selectthemodelfromtheRoamAbout
Modellist.
13. TochangethedefaultAPmodel,selectthemodelfromtheDefaultAPModellist.
14. TochangetheAPconnectiontype,selectoneofthefollowingtypesfromtheAPConnection
Typelist:
• Distributed—APscanbe
indirectlyattachedthroughintermediateLayer 2orLayer 3
devices.
• Distributed(Auto)—APscanbeindirectlyattachedthroughintermediateLayer 2or
Layer 3devices.RASMautomaticallyconfigurestheAPsusingaprofilethatassignsa
DistributedAPnumberandnametotheAPfromamongtheunusedvalidAPnumbers
availableontheswitch.
15. Click
Next.IfyouselectedDistributedintheAPConnectionTypelist,the Redundant
Connectionspageappears;gotostep 16 .IfyouselectedDistributed(Auto)intheAP
ConnectionTypelist,theCapacityPlanningforDatapageappears;gotostep 20.