User`s guide

Create Your RF Coverage Area
5-6 Using RF Auto-Tuning with Modelling
Create Your RF Coverage Area
TocreateyourRFcoveragearea,createawiringcloset(notmandatory),designateanareaforRF
coverage,andaddAPstothecoveragearea.DistributedAPsareindirectlyattachedthrough
intermediateLayer2orLayer3devices.
Creating a Wiring Closet
Toaddthelocationofawiringclosettothefloorplan:
1. DisplaythefloorplanintheContentpanel.
2. IntheTaskListpanel,clickTools.
3. IntheWiringCloser/MiscareaunderCoverageArea,clickthe(WiringCloset)icon.
4. Clickinthefloordisplaywhereyouwanttoplacethe
wiringcloset.TheCreateWiringCloset
wizardappears.
5. IntheNamebox,typethenameofthewiringcloset(1 to 60characters,withnotabs).
6. ClickonaRoamAboutSwitchintheAvailableDevicesbox,thenclicktheAddbuttontomove
ittotheCurrentDevicesbox.
7. ClickFinishtosavethe
changes.Thewiringclosetisdisplayedonyourfloorplan.