User`s guide

RoamAbout Switch Manager User’s Guide 5-1
5
Using RF Auto-Tuning with Modelling
What Is RF Auto-Tuning with Modelling?
RFAuto‐Tuningwithmodellingisatechniqueyoucanusetoconfigureandimplementyour
network.ThistechniquebuildsontheRFAuto‐Tuningmethod.YouwillstilluseRFAuto‐Tuning
(autotuning)toadjustpowerandchannelsettingswhichprovideRFsignalstothecoveragearea.
You’llthen
enhancetheautotuningfeaturebyprovidingmodellinginformationaboutyour
geographiclocation.
AfterusingRFAuto‐Tuning,providemodellinginformationaboutyour
geographiclocationtoenhancetheautotuningfeature.
Tousethistechnique,completethetasksdescribedin“UsingRFAuto‐TuningwithModelling”on
page 5‐1.Then,completethefollowingsteps :
1. Addsiteinformation (buildingsandfloors)orimporta
floordrawing
2. AddRFobstacles(optional)
3. AddanRFcoveragearea
Byprovidingsomeinformationaboutyourbuildingsandfloors,RoamAboutSwitchManager
(RASM)gainstheinfo rmationtobettervisualizeyournetworktopologyandsupportimproved
monitoring.
Tolearnmoreabou tthe benefitsofRFAuto‐Tuning withmodelling,referto“RF
Auto‐Tuning
withModelling”onpage 2‐3.
For information about... Refer to page...
What Is RF Auto-Tuning with Modelling? 5-1
Add Site Information 5-2
Insert RF Obstacles 5-5
Create Your RF Coverage Area 5-6
What’s Next? 5-15