Specifications

Radio Interface
4-58 Advanced Configuration
Using the CLI for the VAPs
Fromtheglobalconfigurationmode,entertheinterfacewirelessacommandtoaccessthe802.11a
radiointerface,ortheinterfacewirelessgcommandtoaccessthe802.11gradiointerface.Usethe
vap[1‐7]commandtospecifytheVAPyouwanttoconfigureandtoenterVAPmode.SettheVAP

SSIDusingthessidcommandand,ifrequired,configureanamefortheVAPusingthe
descriptioncommand.Usethenative‐vlanidcommandtospecifythenativeVLANIDforthis
VAP.EnablesecureaccessforthisVAPwiththesecure‐accesscommand.Setanyotherparameters
asrequired.Specifywhether
clientsassociatedwiththisVAPcanestablishwireless
communicationswitheachotherthroughtheAPwiththeibss‐relaycommand.Specifythe
maximumnumberofclientsthatcanassociatewiththeVAPusingthemax‐association command.
ToviewVAPsettings,usetheshowinterfacewireless<a|g><vap#>command.