Specifications

SNMP
RoamAbout Access Point 3000 Configuration Guide 4-35
• GroupLististhelistofgroupsforSNMPv3users.TheaccesspointenablesSNMPv3usersto
beassignedtothreepre‐definedgroups.Othergroupscannotbedefined.Theavailable 
groupsare:
– ROisaread‐onlygroupusingnoauthenticationandnodataencryption.Usersin
this
groupusenosecurity,authenticationorencryption,inSNMPmessagestheysendtothe
agent.ThisisthesameasSNMPv1orSNMPv2c.
– RW Authisaread/writegroupusingauthentication,butnodataencryption.Usersinthis
groupsendSNMPmessagesthatuseanMD5key/passwordforauthentication,
butnota
DESkey/passwordforencryption.
– RWPrivisaread/writegroupusingauthenticationanddataencryption.Usersinthis
groupsendSNMPmessagesthatuseanMD5key/passwordforauthenticationandaDES
key/passwordforencryption.BoththeMD5andDESkey/passwordsmustbedefined.
–SecurityLevel
‐ noAuthNoPrivusesno
authenticationorprivacy
‐ authNoPrivrequiresauthentication,butnotprivacy
‐ authPrivrequiresauthenticationandprivacy
– WriteViewallowswriteaccesstosetobjects.
– ActionAddaddsanewgroup;Edtallowsyoutoeditanexistinggroup;Deldeletesthe
group.
•SNMPTargets
– TargetIDisthenameyouentertoidentify
theSNMPtarget.Maximum:32characters.
– IPAddressistheIPaddressoftheuser.
– UDPportistheUDPportoftheserver.
– SNMPuseristhenameoftheuser.ThisnamemustmatchthenameyouenteredinSNMP
Users.
– FilterIDisthefilterIDthat
youenteredintheSNMPFiltersection.
– ActionAddaddsanewtarget;Edtallow syoutoeditanexistingtarget;Deldeletesthe
target.
•SNMPFilter
– NewFilteristhenameyouentertoidentifyafiltertha tincludesorexcludescertain
notifications.Maximum:32characters.
– FilterTypespecifieswhether
thefilterincludesorexcludesthespecifiednotification.
Includesmeansthatnotificationsthatarepartofthesubtreewillbefilteredout.Exclude
meansthatnotificationsthatarepartofthesubtreewillbesent.
– SubtreeisanOIDstringthatspecifiesthefamilyofsubtreesincludedorexcludedbythis

filter.Thestringmustbeprecededwithaperiod(.).
Forexample,.1.3.6.1.
– ActionAddaddsafilter;Edtallowsyoutoeditanexistingfilter;Deldeletesthefilter.