Specifications

SNMP
RoamAbout Access Point 3000 Configuration Guide 4-31
Using the CLI
Usetherogueapcommandtodetect neighboring access points and access points that are not authorized
to participate on the network.Usetheinterfaceacommandtosetaccesspointdetectionparameters
for802.11ainterfaces. Usetheinterfacegcommandtosetaccesspointdetectionparametersfor
802.11b/ginterfaces.SetuptherogueAPfeaturebyspecifyingthescanduration;interduration
amount
oftimetomakefrequencychannelsactivetoclients;andtheintervalbetweenscans.To
userogueAPdetection,enableradiusauthenticationusingtheradiuscommand.Toinitiatea
RogueAPscanforallinterfaces,usethescancommand.Usetheshowrogueapcommandfrom
theExecmodetoview
interfaceaandinterfacegsettingsand toviewscanresultsforboth
interfaces.
SNMP
TheaccesspointincludesanonboardagentthatsupportsSNMPversions1,2c,and3.Accessto
theonboardagentusingSNMPv1andv2ciscontrolledbycommunitystrings.Tocommunicate
withtheaccesspoint,amanagementstationmustfirstsubmitavalidcommunitystringfor
authentication.
Access
totheonboardagentusingSNMPv3providesadditionalsecurityfeaturesthatcover
messageintegrity,authentication,andencryption;aswellascontrollingnotificationsthataresent
tospecifiedusertargets.
YoucanuseanetworkmanagementapplicationsuchasEnterasysNetworksNetSightAtlas
ConsoletomanagetheAccessPoint3 000
viaSNMPfromanetworkmanagementstation.
ToimplementSNMPmanagement,theAccessPoint3000musthaveanIPaddressandsubnet
mask,configuredmanuallyordynamically.OnceanIPaddresshasbeenconfigured,appropriate
SNMPcommunitiesandtrapreceiversshouldbeconfigured.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#rogue-ap interface-a duration 500
RoamAbout 3000(config)#rogue-ap interface-a interduration
1000
RoamAbout 3000(config)#rogue-ap interface-a interval 750
RoamAbout 3000(config)#rogue-ap interface-a enable
RoamAbout 3000(config)#rogue-ap radius enable
RoamAbout 3000(config)#exit