Specifications

Rogue AP Detection
4-30 Advanced Configuration
Using Web Management
SelectRogueAPDetectionfromthemenu.TheRogueAPDetectionselectionsaredisplayedin
thefollowingscreen.
• RADIUSAuthenticationenablestheaccesspointtodiscoverrogueaccesspoints.Enabling
RADIUSAuthenticationcausestheaccesspointtochecktheMACaddress/BasicServiceSet
Identifier(BSSID)ofeachaccesspointthatit
findsagainstaRADIUSservertodetermine
whethertheaccesspointisallowed.WithRADIUSauthenticationdisabled,theaccesspoint
canidentifyitsneighboringaccesspointsonly;itcannotidentifywhetherthe accesspointsare
allowedorarerogues.IfyouenableRADIUSauthentication,youmustconfigureaRADIUS
server
(ontheRADIUSpage)forthisaccesspoint.
• APScanIntervalspecifiesthewait‐timebetweenscans.Default:720minutesbetweenscans.
• APScanDurationspecifiestheamountoftimetoscaneachfrequencychannel.Default:350
milliseconds.
• APScanNowbuttonscansforthespecifiedinterface.
• ScanAll
buttonscansforall802.11aand802.11b /ginterfaces.