Specifications

CDP Settings
RoamAbout Access Point 3000 Configuration Guide 4-27
• PortStatus:
– Disable‐disablesthisAPfromusingCDP.
– Enable‐enablesthisAPtouseCDPandtosendinformationaboutitselfatthe specified
TransmitFrequency.
– Auto‐enablesthisAPtouseCDPandtosendinformationaboutitselfonlywhen
neighborsrequestinformation.Default:Auto
Using the CLI
Fromtheglobalconfigurationmode,enablecdpwiththecdpauto‐enableorcdpenable
commands.Specifytheholdtime,transmitfrequencyandoptionallyanauthenticationcodeusing
thecdphold‐time,cdptx‐frequencyandcdpauthenticationcommands.Todisablecdp,usethe
cdpdisablecommand.Usetheshow
cdpcommandfromExecmodetodisplaycdpsettings,orto
viewneighborentriesorcdptrafficstatics.