Specifications

TCP / IP Settings
RoamAbout Access Point 3000 Configuration Guide 4-7
•WebServers
– HTTPServerallowstheaccesspointtobemonitoredorconfiguredfromabrowser.
– HTTPPortspecifiestheporttobeusedbytheWebbrowserinterface.
– HTTPSServerallowsyoutoenableordisablethesecureHTTPserverontheaccesspoint.
– HTTPSPort specifiesthe
UDPportnumberusedforHTTPS/SSLconnectiontotheaccess
pointʹsWebinterface.
•Telnet&SSHSettings
Telnetallowsyoutomanagetheaccesspointfromanywhereinthenetwork.Telnetisnot
securefromhostileattacks.Therefore,itisrecommendedtousetheSecureShell(SSH).The
SSH
protocolusesgeneratedpublickeystoencryptalldatatransferspassingbetweenthe
accesspointandSSH‐enabledmanagementstationclientsandensuresthatdatatraveling
overthenetworkarrivesunaltered.
– TelnetServerdisablesorenablestheTelnetserver.Default:Enabled.
– SSHServerdisablesorenablestheSSHserver.Default:
Enabled.
– SSHPortNumbersetstheUDPportfortheSSHserver.Range:1‐22,24‐79,81‐442,444‐
2312,2314‐65535; Default:22
Notes: SSH Port Number range may vary from range specified here; range varies based on default
ports defined on access point and port usage by other applications.
After software upgrade or configuration reset, the SSH server requires approximately five minutes
to generate host encryption keys. The SSH server is disabled while the keys are being generated.