Specifications

TCP / IP Settings
RoamAbout Access Point 3000 Configuration Guide 4-5
TCP / IP Settings
ConfiguringtheAccessPoint3000withanIPaddressexpandsyourabilitytomanagetheaccess
point.AnumberofaccesspointfeaturesdependonIP addressingtooperate.
Bydefault,theAccessPoint3000willbeautomaticallyconfiguredwithIPsettingsfroma
DynamicHostConfigurationProtocol(DHCP)server.However,
ifyouarenotusingaDHCP
servertoconfigureIPaddressing,usetheCLItomanuallyconfiguretheinitialIPvalues(referto
Chapter3).Afteryouhavenetworkaccesstotheaccesspoint,youcanusetheWebbrowser
interfacetomodifytheIPconfiguration,ifneeded.
Note: You can use the Web browser interface to access the access point if the access point already
has an IP address that is reachable through your network.
Note: If there is no DHCP server on your network, then the access point will automatically start up
with its default IP address, 192.168.1.1.