Specifications

Initial Configuration Steps
3-10 Initial Configuration
5. Setusernameandpassword.
a. ClickAdministrationfromthemenuontheleftofthepage.
TheAdministrationpageappears.
b. SpecifyanewusernameintheUsernamefield.
c. SpecifyanewpasswordinthePasswordfield.
d. SpecifythenewpasswordagainintheConfirmPasswordfield.
e. ClickApplyatthebottomofthepage.
The
accesspointdisplaysaSettingsSavedmessage.
f. ClickOK.
TheAdministrationpageappears.
6. SetmanagementVLAN:
a. ClickFilterControlfromthemenuontheleftofthepage.
TheFilterControlpageappears.