Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-175
native-vlanid
ThiscommandconfiguresthenativeVLANIDfortheaccesspointradiointerfaces.
Syntax
native-vlanid <vlan-id>
vlan‐idisthenativeVLANID.Range:1‐4094
Default Setting
1
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
•UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
•ToimplementthenativeVLANIDsettingforeachradiointerface,youmustenableVLAN
supportontheaccesspointusingthevlancommand.
•WhenVLANsareenabled,theaccesspointtags
framesreceivedfromwirelessclientswith
thenativeVLANIDfortheradiointerface.IfIEEE802.1xisbeingusedtoauthenticate
wirelessclients,specificVLANIDscanbeconfiguredontheRADIUSservertobeassigned
toeachclient.UsingIEEE802.1xandacentralRADIUSserver,upto
64VLANIDscanbe
mappedtospecificwirelessclients.
•IftheVLANIDhasnotbeenconfiguredforaclientontheRADIUSserver,thentheframes
aretaggedwiththenativeVLANIDoftheradiointerface.
Example
ThefollowingexampleshowssettingthenativeVLANIDforthedefaultinterfaceandaVAP.
Related Commands
vlanpageA‐174
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
RoamAbout 3000(if-wireless a)#native-vlanid 3
RoamAbout 3000(if-wireless a)#vap 6
RoamAbout 3000(if-wireless a: VAP[6])#native-vlanid 30
RoamAbout 3000(if-wireless a: VAP[6])#end
RoamAbout 3000(if-wireless a)#