Specifications

Command Groups
A-172
management-vlan
ThiscommandenablesthemanagementVLANIDfortheaccesspoint.Usethenoformtodisable
themanagementVLAN.
Syntax
management-vlan enable
no management-vlan
Default Setting
Disable
Command Mode
GlobalConfiguration
Command Usage
•ThemanagementVLANisformanagingtheaccesspoint.Forexample,theaccesspoint
allowstrafficthatistaggedwiththespecifiedVLANtomanagetheaccesspointviaremote
management,SSH,SNMP,Telnet,andsoon.
•ChangingtheVLANstatusoftheaccesspointrequiresasystemreboot.
Example
Related Commands
management‐vlanidpageA‐173
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#management-vlan enable
Reboot system now? <y/n>: n
VLAN functionality will not take effect until the next reset occurs!!
RoamAbout 3000(if-wireless a)#