Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-163
rogue-ap [interface-a | interface-g] scan
Thiscommandcausestheaccesspointtoscanthespecifiedradiointerfaceforneighboringaccess
pointsandforrogueAPs,ifrogueAPRADI US isenabled.
Syntax
rogue-ap [interface-a | interface-g] scan
Default Setting
N/A
Command Mode
GlobalConfiguration
Command Usage
Scansthespecifiedradiointerfac eonly.Toscanallradiointerfaces,usetherogue‐apscan
command.
Example
Related Commands
rogue‐apenablepageA‐159
rogue‐apscanpageA‐165
rogue‐apsortmodepageA‐166
rogue‐apradiuspageA‐164
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#rogue-ap interface-a scan
RoamAbout 3000(config)#