Specifications

Command Groups
A-156
qos mac-addr
ThiscommandallowsyoutoenteruptotenMACaddressesandthepriority.
Syntax
qos mac-addr <mac address> <0 - 7>
macaddressistheMACaddressoftheclientthatyouwanttoassignthepriority.
0‐7isthepriority.
Default Setting
None
Command Mode
GlobalConfiguration
Example
qos ether-type
ThiscommandallowsyoutoentertheEthernettypesintheEthernettypetable,andthepriority
class.TheEthernettypemustbespecifiedintheformatHEX0000‐FFFF.
Syntax
qos ether-type <0000-FFFF> <0 - 7>
0000‐FFFFistheEthernettypeasspecifiedintheEthernettypetable.
0‐7isthepriority.
Default Setting
None
Command Mode
GlobalConfiguration
Example
Note: You must configure at least one MAC address classification before the source or destination
address-based qos mode will take affect.
RoamAbout 3000#configure
RoamAbout 3000(config)#qos mac-addr 00-01-f4-32-62-ac 6
RoamAbout 3000(config)#
Note: You must configure at least one Ethernet type classification before the Ether type-based qos
mode will take affect.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#qos ether-type 0800 6
RoamAbout 3000(config)#