Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-151
show interface wireless
Thiscommanddisplaysthestatusforthewirelessinterface.
Syntax
show interface wireless <a | g> <vap#>
•aisthe802.11aradiointerface
•gisthe802.11gradiointerface
•vap#isthevapontheaorgradiointerfacethatyouwanttoview
Default Setting
None
Command Mode
Exec
Example
RoamAbout 3000#show interface wireless g
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : RoamAbout AP3000 - 802.11 b/g
SSID : RD-AP#3
802.11g band : 802.11g
Channel : 1
Status : Enable
----------------802.11 Parameters--------------------------
Transmit Power : HALF (13 dBM)
Maximum Tx Data Rate : 36 Mbps
Multicast Data Rate nnnnnnn: 11 Mps
Fragmentation Threshold : 512 bytes
RTS Threshold : 256 bytes
Beacon Interval : 150 ms
DTIM Interval : 100 beacons
Maximum Association : 32 stations
Native VLAN ID : 1
VLAN State : DISABLED
----------------Security-----------------------------------
Secure Access : DISABLED
Multicast cipher : TKIP
Unicast cipher : TKIP
WPA clients : Required
WPA Key Mgmt Mode : Preshared key
WPA PSK Key Type : Alphanumeric
Encryption : 128-BIT ENCRYPTION
Default Transmit Key : 3
Static Keys :
Key 1: EMPTY Key 2: EMPTY Key 3: ***** Key 4: EMPTY
Authentication Type : OPEN
===========================================================
RoamAbout 3000#