Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-141
max-association
Thiscommandconfiguresthemaximumnumberofclientsthatcanbeassociatedwiththeaccess
pointatthesametime.
Syntax
max-association <count>
countisthemaximumnumberofassociatedstations.Range: 0‐250
•Themaximumnumberofassociationsis250ifyouareNOTusingencryptionor
authentication.
•Themaximumnumberofassociationsis120ifyouAREusingencryptionorauthentication.
Default Setting
100
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
Example
Thefollowingexampleshowssettingthemax‐associationforthedefaultinterfaceandaVAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#max-association 32
RoamAbout 3000(if-wireless g)#vap 1
RoamAbout 3000(if-wireless g: VAP[1])#max-association 10
RoamAbout 3000(if-wireless g: VAP[1])#end
RoamAbout 3000(if-wireless g)#