Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-137
encryption
ThiscommanddefineswhetherWEPencryptionisusedtoprovideprivacyforwireless
communications.Usethenoformtodisableencryption.
Syntax
encryption
no encryption
Default Setting
Disabled
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
WiredEquivalentPrivacy(WEP)isimplementedinthi sdevicetopreventunauthorized
accesstoyourwirelessnetwork.Formoresecuredatatransmissions,enableWEPwiththis
command,andsetatleastone
staticWEPkeywiththekeycommand.
TheWEPsettingsmustbethesameoneachclientinyourwirelessnetwork.
NotethatWEPprotectsdatatransmitted betweenwirelessnodes,butdoesnotprotectany
transmissionsoveryourwirednetworkorovertheInternet.
AlthoughWEPkeysarenot
neededforWPA,youmustenableWEPencryptioninorderto
enablealltypesofencryptionintheaccesspoint.
Example
ThefollowingexampleshowssettingWEPencryptionforthedefaultinterfaceandaVAP.
Related Commands
keypageA138
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#encryption
RoamAbout 3000(if-wireless g)#vap 6
RoamAbout 3000(if-wireless g: VAP[6])#encryption
RoamAbout 3000(if-wireless g: VAP[6])#end
RoamAbout 3000(if-wireless g)#